Originally Posted by
Ffejdat
John St.Amant or anyone else- didi you ever come up with a solution, or a fix from assoc or yourself for the uneven front caster problem? Just wondering what the fix was, or which part was bad, remedy, etc... Haven't seen it here yet, but good to know what the fix is if it pops up... THANKS!!
The solution has been there ever since the older AE front end. You check the caster from side to side and shim the front end to make it even. Just grind a little off the inner mount (not the arm) and shim what ever side needs it.
Uneven caster is normally from not getting the camber links installed perfectly straight. It's not normally anything to do with the molds.