Originally Posted by
Grease
Is there a better swaybar setup for the Mi3? I never seem to get the same amount of force left to right with the stock swaybar setup even when repositioning the swaybars. And the links never seem to be at the same angle from left to right.
If you have Mi2EC front arms you can mount the stock Mi3 sway bar off the top of the front bumper brace where it screws to the bulkhead then run the links to the molded ball in the Mi2EC arms.....this setup actually works better because the pivot locations are further out on the arms then with the stock Mi3 arms.....with the stock mi3 arms the pivot location is too close the the center of car IMO to really have any effect unless you are using like a 3mm sway bar.