Originally Posted by
Geppetto
Ok, Reenmachine. Thanks. I guess I need to pay closer attention to the instructions in the side bar. I can now see that there is a slight indication of shading for the different color spacers. I tried using my calipers to measure the different spacers, but one of the measurements must refer to the inner hole, because the size didn't seem to match up.
A spacer called 3x2.5, for example, has a 3mm hole and a 2.5mm thickness.
Originally Posted by
Geppetto
On a related note, take a look at the attached images. The front bulk head shown in the manual has only 4 holes for mounting the turnbuckles. The bulk head that came in my kit actually has 5 holes.
Are you sure? My rear bulkhead has 5 holes but the front only has 4 as shown in the manual.