Originally Posted by
GeorgePravata
Thanks. Joe So a good .21 would be fine. I have a Jammin JPX .21 with a JP-2 I also have a JP-6 and a JP-1 pipe.at that track what pipe would be best for that track. Torq. Or top end
Thanks George
With that JPX engine, i would run a top-end pipe, as that engine already has a ton of bottom.. When i ran the jpx, i used a NR 086, and it was dialed.
if you had to pick from those JP pipes i'd say the JP-2.. The JP-1 would be to much bottom.. Not sure about the JP-6 never ran one. Good Luck!