R/C Tech Forums - View Single Post - Team Associated TC5
View Single Post
Old 10-27-2008, 07:32 PM
  #7688  
Josh Hohnstein
Tech Master
iTrader: (3)
 
Join Date: Nov 2003
Posts: 1,789
Trader Rating: 3 (80%+)
Default

Originally Posted by outlandr91
I'm trying to set up my TC5 for VTA and have run into a problem.The rear end is loose.It mostly happens in the right-hand, high speed sweeper.It starts as a slow spin just after corner entry.I run at a carpet track.Here is my set up.
ride height=5mm, front&back
40w shock oil, 100% rebound
gold front springs, silver rear springs
front shock mount 3B, rear shock mount 3B
front camber link 5A, rear camber link 3
front droop=3, rear droop = 5
batteries, 4 cell NimH in the foward position.
ITF chassis and top deck.
I tried new tires,old tires.saucing, no saucing
The radio's dual rate is @ 50%
The shocks are equal length,the chassis isn't tweaked.
Any help will be appreciated.

Do you have weight added to the battery side of the chassis?? You will be about 140 grams light on that side with only 4 cells.
Josh Hohnstein is offline