Originally Posted by
jer7469
hi guys 5.0 boy pm me and asked to send pics. but i cant get pics down enough to post. if you want picks pm me or email me and i will send them out. im using the 2000 losi lopo. and regulator. basicly i ground down the hole middle dividing lip. removed the center post also. you need to bolt and nut the 2 outer covers toegther. also grind a relief notch on the battery cover and front outer cover to bet clearance. i dont use a switch. so i ran my wires thru a hole i made in the battery long cover towards the rear. i use the futaba fast reciever also. the regulator is taped or glued unger the top front outer cover above the battery. i also add foam under and around all dead areas. hope this helps. email or pm for pics. jeremy
have some one host the pics on their photobucket or something...Much easier