R/C Tech Forums - View Single Post - Murnan Modified Motors
View Single Post
Old 10-06-2008, 08:28 AM
  #1968  
Grinder
Tech Master
iTrader: (2)
 
Grinder's Avatar
 
Join Date: Feb 2003
Posts: 1,864
Trader Rating: 2 (100%+)
Default

Originally Posted by sm1nts2escape
Thanks for the hp uriah.Looks like I am going to have to lower my gear ratio in first and second gear now.She is very thirstyWhat are the temp guidlines for this motor?

I would try different pipes, and restrictor with the engine. The small oval gives good mileage.
As far as temps go.. I would stay under 270F with the engine. The most important thing is to watch the combustion chamber. Take the plug out, and make sure it is not getting too dry. The glowplug should be shiny. Sometimes the engine can run 250, and be too lean, sometimes 300, and still be OK. There are lots of variables that make the engine run hot, or cool. The most certain way to make sure you are running in tune is to see some smoke, and check the glowplug.
Grinder is offline