Originally Posted by
Semple
Yeah, I have tried those. They are too small. They hold for a short while before breaking loose. With one of the shims they come with, I can't get any play at the end of the clutch bell unless I go without shims. The RB collet is too big.
You can run without the small shims that they show b/w the spacer and b/w the bearing and clutch nut if you need to. I had to take them all out b/c the bell wouldn't spin freely with any of the small shims in. About 3/4 gallon through, I pulled the clutch and the bearings looks fine.