Hi Guys
Here is my L-P-W (Lipo Weight Plate) Made from 1.5mm stainless steel, with 60grams of lead stuck to the base of it, (I may screw them on in the next version) it weighs in at a total 150 grams. I have a foam block at the front of the Lipo, which slips neatly up against the bulk head to stop it from moving forward, as I have sanded the lumps off of the bottom of the Orion 3800 so as to get it under the top deck. I have stuck a strip of foam to stop from moving inward the the car, even though it probably wont because of the tape holding it, I have made a ledge to stop it from coming out of the L-P-W and covered it in a sticky back CF paper. Its attached to the chassis by using original holes, one for the ariel mount, and the one just back from that. I have no extra lead anywear in the TC and now weight in at 1508.
Any questions ask away
Cheers Malc TCCFM
