Here is Hupo H set up from the 2008 Reedy Race
Front
middle hole on Tower
Tamiya 400 Wt 3 hole pistons
3.5mm under camber link in middle hole
Furthest hole on A arm
4mm hex hub .5mm spacer
416 D front and 416 d rear flat
HPI silver spring
5mm ackerman
.5mm bump steer spacer
droop 6
arm spacing 2 mm front 2mm rear
Rear
3rd hole out on tower
Tamiya 400 wt 3 hole pistons
3.5mm under camber link middle hole
3mm spacer outside hole rear hub
HPI Blue spring
2nd hole outside on a arm
4mm hex hubs
1xa rear front 1d rear
mazda speed 6 body
arm spacing 3mm front 1mm rear