pokie- Set up is as follows
FRONT
0 kick up
4 degree caster blocks
front oneway
0.5 toe out
1 degree camber
50wt oil
57 pistons
purple springs(Todd runs blue)
arms centered
camber link 2nd hole from inside
shock tower 2nd hole from inside
5mm ride height
REAR
0 anti squat
2 degree rear toe
1 degree camber
40wt oil
56 pistons
arms centered
purple springs(Todd runs blue or softer)
camber link 2nd hole from inside (Todd is in the 3rd hole)
outer hole on rear hub with longer ball stud
shock tower 2nd hole from the inside
5mm ride height
rear arm shock in outer hole.
battery forward
Orion 8x2 geared 120/24 with Reedy quasar brush
Integy SMH 3000's (killer packs at a good price)
belt tension a bit off of it's tightest setting
24mm proline wheels
Yokomo 137 tire's with yok med insert
Protoform Vauxhall(sp)
This is everything that I ran this weekend. If you have any other questions please feel free to ask away....
.....you will have to shave your rear ball cups a bit with the longer ball stud so that it doesn't rub the rim.
