Spooky-Try this:
High Traction Asphalt Setup
Front:
Shock tower-3
Upper Hub Ball-1
Steering arm-2
Upper a-arm mount-2
Lower suspension arm-1
Hinge pin mount-2 deg
Oil-70wt
Spring-Red
Piston-2 holes on stock piston
Spacer-none
Length-66mm
Droop-2.5mm (3mm on Hudy gauge)
Anti-Roll Bar-Stock
Castor-8.5 deg, one spacer in front and behind the upper a-arm mount
Toe in-0 deg
Ride Height-5mm
Camber-0.5 deg
Lower wishbones-stock, rear position
Driveshafts-stock, plastic
Rear:
Shock tower-3
Upper Hub Ball-1
Upper a-arm mount-2
Lower suspension arm-1
Hinge pin mount-2 deg
Oil-70wt
Spring-Red
Piston-2 holes on stock piston
Spacer-none
Length-66mm
Droop-2.5mm (3mm on Hudy gauge)
Anti-Roll Bar-Stock
Anti-squat-none, blocks flat on chassis
Toe in-2 deg
Ride Height-5mm
Camber-1 deg
Lower wishbones-stock, mid position
Driveshafts-stock, plastic
Motor-P2K2 (35/116) and Chameleon2 (34/116)
Drive Pulley-17T
Body- Protoform Stratus
One Way-None
Front Tires-Yokomo 138G
Rear Tires-Yokomo 138G
Inserts-Yokomo Firm Molded
Tire Traction-none
Chassis-Carbon
ESC-Keyence Zero V Extreme
Cells-Schumacher XVS Stock Metals (G704)
Med/Low Traction Asphalt Setup
Front:
Shock tower-3
Upper Hub Ball-1
Steering arm-2
Upper a-arm mount-2
Lower suspension arm-1
Hinge pin mount-2 deg
Oil-60wt
Spring-Blue
Piston-2 holes on stock piston
Spacer-none
Length-66mm
Droop-2.5mm (3mm on Hudy gauge)
Anti-Roll Bar-Stock
Castor-8.5 deg, one spacer in front and behind the upper a-arm mount
Toe in-0 deg
Ride Height-5.5mm
Camber-0 deg
Lower wishbones-stock, rear position
Driveshafts-stock, plastic
Rear:
Shock tower-3
Upper Hub Ball-1
Upper a-arm mount-2
Lower suspension arm-1
Hinge pin mount-2 deg
Oil-60wt
Spring-Blue
Piston-2 holes on stock piston
Spacer-none
Length-66mm
Droop-2.5mm (3mm on Hudy gauge)
Anti-Roll Bar-Stock
Anti-squat-none, blocks flat on chassis
Toe in-2.5 deg
Ride Height-5.5mm
Camber-1.5 deg
Lower wishbones-stock, mid position
Driveshafts-stock, plastic
Motor-P2K2 (35/116) and Chameleon2 (34/116)
Drive Pulley-17T
Body- Protoform Stratus
One Way-None
Front Tires-Yokomo 138G
Rear Tires-Yokomo 138G
Inserts-Yokomo Molded Firm
Tire Traction-None
Chassis-Carbon
ESC-Keyence Zero V Extreme
Cells-Schumacher XVS Stock Metals (G704)
Darkside-We have to assume that people are going to beat the crap out of their cars. As a result we have to build in extra safetly margins like not counter sinking too deep. A lot of people counter sink their chassis more than stock and have no problems. We build a durable car an leave it up to the racers to decide if they need to do this. To be honest though, I don't think I have ever lost a race due to screw drag...LOL!