Originally Posted by
Stimey131
I just started building my Matrix TR FRE and I was wonder which shock ends you guys recomend. the manual says to use the short ones so for now thats what I will use. Any input on this would be great and what will using the either the short or long end change in my set up. thanks guys
The short shock ends will give your front end more travel than the long ends. You have to be carefull on where you mount the shocks on the tower though. Up to high will allow the axels to come out of the drives. It will be easy to see which hole on the tower will work best by pushing the front end down on the pit table and watch the axels.