View Single Post
Old 05-01-2008, 08:02 AM  
ezveedub
Tech Elite
 
ezveedub's Avatar
 
Join Date: Aug 2004
Location: Fort Lauderdale, FL
Posts: 2,411
Trader Rating: 14 (100%+)
Send a message via AIM to ezveedub Send a message via Yahoo to ezveedub
Default

Quote:
Originally Posted by njballa View Post
how many shims should this motor have in it stock mine seemed to measure like 0.29 of clearance is that right I took out .8 to make it .21 but now it seems to flame out almost soon as the igniter is removed (may run for 1/4 of a lap)
changed plugs 3 times no help
Stock shimming for 25% nitro is two 0.30mm aluminum shims with a 0.10mm copper shim in between. Add 0.10mm shim for 30% nitro as per the factory.
__________________
Kyosho, Mugen Seiki, Maxy's Fuel, KO Propo
O.S., Ninja JX, Novarossi, RMV
ezveedub is offline   Reply With Quote