Originally Posted by
bigbutstupid
mind posting details of your setup? cheers buddy
On the top of my head:
Sorex 32's with Xenon Black insert, Paragon full rear and 1/2 inside front
Ride Height 5mm all-around
Front Droop 5mm
Front Caster block 4 deg
Front Toe 0 Deg
Front Camber -1.5; inside link location lower inner w/ 3mm shim
Front Shocks 45 wt, stock piston, with sponge - TAMIYA Blue Spring
Front Shock position, Top = middle, Bottom = outermost (flipped arm, only 2 mounts)
Stock Roll Bar
Front Suspension blocks 1A (rear, flipped over) & 1B (front, oriented normally)
Rearward ackerman position
Rear Droop 4mm
Rear Camber -1.5; inside link location innermost w/ 3mm shim
outside link location innermost w/ 2mm shim
Rear Shocks 40 wt, stock piston, with sponge - TAMIYA Yellow spring
Rear Shock position, Top = 3rd from outermost, Bottom = middle position
Stock roll bar
Rear suspension blocks 1 XB (front, normally oriented) and 1B (rear).
(Total Rear Toe-IN = 2 deg)
Stock arms
ONE-WAY
