R/C Tech Forums - View Single Post - No low end power in Werks B3 ?
View Single Post
Old 01-20-2008, 07:56 PM
  #3  
Jason Halvorson
Tech Elite
iTrader: (22)
 
Jason Halvorson's Avatar
 
Join Date: Apr 2007
Location: Grand Forks ND
Posts: 3,955
Trader Rating: 22 (100%+)
Default

Originally Posted by Madbrad
After breaking in the motor I started tuning for better performance and I cant get any power in the low end. If you give it full throttle from a stop it take about 5 sec before it starts to really move. I put in stiffer clutch springs 1.0mm hoping that would help but it didn’t. I’m running a 15 tooth CB and Dynamite 053 pipe. One test Ive done for the low end is the pinch test, it idles for 3 sec slightly revs and the dies. Top end has a nice smoke trail coming from it, maybe a little rich but it’s on the safe side. So after 2 days of pulling my hair out, I am ready for some help.
almost no engine will have good bottom with a 15T CB try a 13T...im sure you will have better results...

oh btw what bug or trug are you running???
Jason Halvorson is offline