Originally posted by Doug Gaut
Setup is as follows:
Front:droop 1
pivot support 2
4.5mm ride height
stock caster
60wt oil
56 piston
pink spring
#2 on shock tower
#2 on camber
Rear: droop 5
pivot support 0
4.5mm ride height
stock rear blocks
60wt oil
55 piston
yellow spring
#2 on shock tower
outside rear arm
A1 on camber pos
-1 camber front and rear
front batt position
transponder behind servo
I would try Pivot 0 in the front with 4 degree carriers and camber 3 in the rear with A position on the hub.