Originally Posted by
SavageSpawn
I picked up some hardened steel Diff Cross Pin kit off of eBay about a month ago and I finally got around to installing them today. My problem is I can not get the diffs apart in my Matrix TR RTR. Did they use a red lock tight?
I have heard about putting items that have red lock in the oven. My question is how long I bake the diffs for and at what temp.
Home depot sells a min blow torch for like 20 bucks would this is easer or more dangerious.
Savage, if yuo have a hot soldering iron just hold it on each screw until they heat up, did try to get it out while the screw is still hot. I have a electric stove, so I just sit the diff on the hot element for 30 second
it works perfect