Originally Posted by air8

Good starting list for bullet proofing



One other thing I tried and stuck with is moving the rear camber link to the 1 position on the shock tower. Stock setting is 4. I did a few add ons to make it stronger. I had a crash course with the buggy so I knew the possible weak points. Alum servo saver top, alum center bearing adapter, captured ends for the steering link, alum front inner hinge pin cover, alum rear bearing inserts. I also added the extended King Headz engine mount but that was more for convenience. Oh I put a screw in the unused hole for the lower shock screws. In the buggy they would back out fast.