b4bandit - check to make sure your droop is the same on both sides, that may cause the issue you are having.
Ran the AE spool for the first time this weekend. Rough start because i did not loctite the screws and they all fell out
, but after that, ran 6 races and 2 practice runs and the blades are still brand new. ran the peak 4.5 w/ gtb speedo, if anyone is wearing out blades, your doing something wrong.
-
the car was dialed all weekend, ran the cavaleri setup from the nats, only diff was a little toe out was added to the front and ran cs-27 tires. running itf chassis/top plate and 4 o-rings in the back of the top plate