Originally Posted by
Brandon Melton
Some people have metnioned a set-up for rubber tire carpet in stock class, try this and tweak from there.
Front-
50wt oil, #2 piston
Gold spring
5.25 mm ride height
7mm droop (on gauge)
3rd hole out on tower, out on arm
6 deg caster
1mm of shim behind hinge pin mounts F and R
2A postion for mounts
1A ackerman
2mm wheelbase shim in rear, 1mm in front of arm
#3 camber link position
-1.5 deg camber
one way
Rear-
40 wt, #2
blue spring
5.5 mm ride height
6mm droop using gauge
3rd hole out on tower, inside hole on arm
2mm toe @ bulkheat, .5 deg outboard toe
2A position for mounts
3A camber link with 1 mm shim underneath ball stud
2mm shim at rear of arm, 1mm in front of arm for wheelbase
-2 deg camber
If I left anything out just ask,
what cam holders front and rear, and belt tension numbers??? thanks