R/C Tech Forums - View Single Post - New ACADEMY 1/10 scale 2WD BUGGY
View Single Post
Old 10-14-2007, 07:55 PM
  #462  
David Alberico
Tech Elite
iTrader: (13)
 
Join Date: Nov 2004
Location: Kansas City
Posts: 2,463
Trader Rating: 13 (100%+)
Default

It was a good weekend. The 2wd mod mains came down to the final main. In the final of 3 it was between myself and 2 other drivers to win. I had a chance but as the track dried out it was back to pin tires and I made a bad tire choice and chose panther tires instead of pinks tapers...had a bit too much rear bite. At the end of the main we were about 1/2 of a straight-away apart. I came up with 2 setups. One a basic setup, this is what I would recommend starting with. Another I had with slicks on, I ran this setup in the final main with treads, it will make the car more aggressive. With the tracktion and slicks I thought the car was awesome. I tried a lot of things this weekend, including some Losi springs, anti-squat, various camber locations...etc.

I can honestly say, this car is just as fast as anything else, and it is right out of the box, no plastic chassis to buy or anything like that...I even ended up with the same springs the come in the kit.

Here are the results from this weekend... top 5...all I can remember

2wd mod

1. Chris Baumgartner - Kyosho RB5
2. Mack Vanderbeek - AE B4
3. David Alberico - Academy - GV2
4. Rod Rippee - AE B4
5. Chad Parks - AE B4


Basic Setup...

Front

camber 3 - C 2 #4 washers under the ballstud
steering - stock rack with one #4 washer on the spindle
MLP - narrow
Shocks - 1 hole academy pistons, 27.5 Losi oil - white spring
shock at middle hole in arm, middle in tower
27.5 aluminum caster kickup

Rear

stock 2 degree's of anti-squat
camber 2 - B no washers
shocks no limiting ( may look like a lot of droop) 25wt losi oil, academy 2 hole pistons white springs
shocks mounted middle in arm and #3 in tower
MLP narrow

tires - 7206P's and 7273P.


Slicks's setup....

Front

camber 3 -C 2 #4 washers
steering rack with one #4 washer under spindle
front shocks .30 limiting 27.5 losi oil, white spring
shock on inside hole in arm middle hole in tower
30 degree caster block
MLP wide

Rear

2 deg anti-squat
camber 2 - A(hub) no washers
MLP - narrow
shocks 27.5, 2 hole pistons white springs
shocks middle in arm #2 in tower


Here are some pic of the car and track....
Attached Thumbnails Click image for larger version

Name:	chillicothe 001.jpg
Views:	404
Size:	212.9 KB
ID:	275287   Click image for larger version

Name:	chillicothe 002.jpg
Views:	699
Size:	227.2 KB
ID:	275289   Click image for larger version

Name:	chillicothe 003.jpg
Views:	282
Size:	116.8 KB
ID:	275290   Click image for larger version

Name:	chillicothe 004.jpg
Views:	375
Size:	163.0 KB
ID:	275291  

Last edited by David Alberico; 10-15-2007 at 12:55 PM.
David Alberico is offline