Originally Posted by
Brian Miskolczi
Sensitive.
Ive been running the front camber link in the lower hole and it has worked out very well. Anyone who hasn't tryed it should try it out.
ANyone have a setup for there 8ight on a super high bite clay track?
My favorite is Front=54/40--silver spring--Middle on tower, inside on arm, inside hole on tower for camber link, short ackerman plate
Rear=56/25 or 22.5---black springs---Middle on tower, inside on arm, inside hole on hub, outside hole on tower, hubs all the way back.
Diffs=3-5-1 or 4-7-2