Never mind lol..... Dad just bought me a Orion 10.5 Vortex
My set up is
1.5 deg on camber front and rear
3.0 pivot block in the rear, 0 in the front
40wt shock oil
Hara's grey soft shock spring kit
silver sway bar up front, copper in the back
0 toe in the front
4 degree c hubs
front shock are in the 3rd hole being stood up
Rear shocks are in the 5th hole from being stood up
4mm of ackerman
Front spool
Locked center pulley's
No shims under my toe blocks
Anything else needed to know?