outtafocus, shocks actually front upper and rear lower on tower, but you should be fine with upper holes on both ends with stock shock bodies. have also shaved rear upper links wheel side so I can use the upper holes on hub but the hub not rubbing against wheel. have also removed material from lower arms where the shock end is mounted (inside). this way I get max droop front and rear. edit: I tried mugen gray springs and they were good. I put rear shock on upper hole. It was a wet track so 5-5-3 would have been better than 3-5-3 I guess.
Last edited by MikaR; 08-14-2007 at 10:07 PM.