Originally Posted by
RcOneNitro
I was told for Losi 8ight pro you should put the higher torque servo on the throttle than for steering. I have a JR 650 and JR 550 on the buggy now - 650 is setup as steering. I also have a JR Z9000T on my Revo and Muggy that I was thinking of taking one of them and putting it on the buggy.
Which servo should I use for steering and throttle?
A servo with 125 oz/in and a speed of at least .15 will work really well for almost any application. These are usually well built with few problems. You get what you pay for with servos. With Ace, JR, Air, Hitec, Futaba servos you can't go wrong. Blue Bird servos are great as well as long as you get the correct servo for the application. I'm using a BB 621MG in my 8 for now. It's 100oz/in at .10. Plenty powerful plus I have lipo/regulator so the servo gets more juice for a bit better performance. Steering has an Ace 1015--200oz/in at .108. It's awesome