try 2.5 out on bottom and then set the top so she peaks just at the end of the back straight mines like 3.5 on top on 3CT very similar to the SL3 if thats what you got
Drop the head shims down to .3
Run either a C6TGF or a C6TGC depends on the air temp and humidity
Originally Posted by
warpspeed57
Hi guys, I have just purchased a new Max Motor made by Novarossi. This engine has awesome power but is very hard to start.
Currently has 6 tanks through it. Running on 12% oil and 16% Nitro,still running rich. Has no mid range screw, am on 4 turns out on the top needle and 3 turns out on the bottom, have tried various plugs but it still wont start easy, also running at 180 Deg F . It also takes a long time to come back down to idle. Any help would be greatly appreciated, thanks