R/C Tech Forums - View Single Post - Kyosho SP2 WC Edition
View Single Post
Old 06-05-2007, 10:01 PM
  #1  
Shocker
Tech Addict
iTrader: (15)
 
Join Date: Jul 2005
Location: AZ
Posts: 564
Trader Rating: 15 (100%+)
Default Kyosho SP2 WC Edition

Here's the official SP2/WC thread. I'll put Cody King's setup at the top.

Cody King SP2/WC Set Up

Front
-------
5000 diff oil
shock oil: Kyosho 700
white pistons (1.4)
dark blue SP2 springs
shock positions: middle hole in tower/inside on arm
22* caster block/camber link in middle hole
Short upper arm (IF-329) with long ball cup
L & A block
std sway bar/balls all the way out
arms well above level
steering in middle hole on ackerman plate
droop limited 1 full turn
-2* camber/2*toe out

Center
--------
7000 diff oil
48 tooth spur/14 tooth bell
3 shoe clutch - 2 carbon, 1 aluminum - 1.0 springs


Rear
------
Kyosho 1300 diff oil
shock oil: Kyosho 400
White pistons (1.4)
std rear sway bar/balls all the way out
2 deg anti squat
3 deg toe
hubs 2/3 forward
camber link long and in lower hole (#6) on tower
shock positions: middle upper hole in tower/inside on arm
light blue SP1 springs
arms just above level
droop slightly limited
-2* camber
Shocker is offline