Originally Posted by
pole_position
Hi guys,
I keep having this problem of the entire steering & servo section jerk to either direction (like the torque steer effect...) when throttling my M-03R.
I have checked. There are no blinding components in the entire suspension, steering assembly, the suspension joints are moving freely.
Any advice on how I can cure this problem? (Can't have the car jerking to one side everytime u throttle out of a corner...
)
Appreciated
If you are using the servo saver that came with the original kit the return sometimes get stuck and that will cause your car to steer right and not return
kindly check that and if it is the problem please put in a shim in between the screw and the plastic (shim)came with kit . Also ensure shim size is smaller than the outer saver.Also you can use tlarge tensioner that comes with Tamiya servo saver and wrap around original plastic servo saver to induce return.(TCS/TAC legal
If not above must be the outdrivers coming loose. check that and use CVD's