Originally Posted by DirtyDog3375
All shims and arm mounts are included in the kit. The only thing you may need to buy are:
* different thickness sway bars
* 1 degree rear hubs
* spool/oneway kit and pulley
* 0.5, 1.0, 2.0 and 3.0mm thickness alloy shims (for outer camber link changes - they do give you some spare 1.0 and 2.0mm shims, but to make finer changes you will need to buy some more....I have used the Tamiya ones)
Hope this helps.
- Leonard.
Also add a set of .5mm and 1mm axle shims to space the wheels out.