Mann Edge get the Jr wall wart charger. Then when you get it take some side cutters and give the end you plug in a slight crimp. Then rotate it 90 degrees and give it another crimp about 3mm further out. That way you are making a good connection. I use a Dynamite wall charger and it works really good. The crimping just makes sure you make good contact.
Freefallmarine, I use the extended hexes 2mm that I kept from my old Mugen MBX5R when the car feels tippy or too planted. That was the first thing I noticed when running this car. It is very stuck and adding the hexes makes it feel alot more stable and you can drive it a little harder. I had three sets and sold two of them at the gas champs at CRCRC this winter, both to Losi drivers...