Tez,
If the fronts rolling and digging in too much try making the front link more angled. This will reduce the front from rolling as much.
If the rear is loose I'd try moving the rear wishbones back by 1.5mm, so you have all the spacers towards the centre of the car. This will make it much more stable.
Also I've noticed you are running 2 hole pistons, I personally woudnt recommend that after much testing. If you get a chance try 3x1.1mm pistons, it should make the car abit more reactive.
I'll fill in a sheet with the setup I'm running, seems to work everywhere I've been with minimal tweaks.
Cheers,
Phil.
Last edited by Phil C; 02-20-2007 at 03:01 PM.