For about 1 degree
Use the F block in the rear. Use the R+2+2 block to get about 1 degree of toe in.
or
Use the F block in the rear with .040 spacer under the F block. Then use the R+2+0.
When you do not use the spacer you have to use the 2 Antisquat becuase the F blocks are lower so the 2+2 give it 0 antisquat.
When you use the Spacer the F block in the Rear is at the stock height so use the 0 antisquat block for 0 antisquat.
This was told to me by barry baker.