Hello my car is excellent but i push coming in to a corner what can i do i would not like to change castor i like the coming out of the 6 degrees
Front end:
RIDE HEIGHT: 5mm
ANTI-ROLL BAR: none
CASTOR: 6º
KICK UP: none
ANTI DIVE: none
TOE: 0º
ROLL CENTER: riser plate + 1
CAMBER: -1.5º
BELLCRANK: center hole + 3mm shims under ballstud
STEERING KNUCKLE: front hole
LOWER SHOCK LOCATION: outer hole
UPPER SHOCK LOCATION: inner hole
CENTER TRACK ROD LENGTH: stock
INNER CAMBER LINK LOCATION: lower hole
NOTES: no riser plate under bulkheads. No wheel spacer on outside of hex.
Front shocks:
OIL: 35 wt.
SPRING: white
PISTON: stock
LENGTH: 61mm
DROOP: 1.5mm uptravel
Rear end:
RIDE HEIGHT: 5mm
ANTI/PRO SQUAT: none
ANTI ROLL BAR: none
TOE IN: 3º
ROLL CENTER: riser plate + 1mm
CAMBER: -1.5mm
WHEELBASE: med/short
REAR HUB LOCATION: center
OUTER CAMBER LINK LOCATION: inner hole
OUTER CAMBER LINK SHIMS: none
INNER CAMBER LINK LOCATION: lower hole
LOWER SHOCK LOCATION: 2nd hole in from outside
UPPER SHOCK LOCATION: 3rd hole in from outside
NOTES: no riser plate under bulkhead. No white plastic wheel spacer on outside of hex
REAR SHOCKS:
OIL: Schumacher 35wt
SPRING: Schumacher white
PISTON: stock
LENGTH: 62.5mm
DROOP: 2.5mm uptravel
Other:
BODY: type m
CHASSIS: stock 2mm
TOPDECK: stock 2mm
FRONT DIFF: spool
ESC: hara
CELLS: smc IB3800
MOTOR: Putanm stock
TIRES: RP30GL