Originally Posted by dr_hfuhuhurr
My standard stock setup for the 12L4 at the local track (medium bite ozite) is as follows:
Front:
.020 springs
10* reactive caster blocks spaced in the middle
Servo Flat - turnbuckles level and straight
Purple Parma Tires Sauced 1/3 of inside
Rear
35wt oil AE Silver spring
.075 T-Bar
90wt Oil
Double Pink Parma Tires Sauced Full (Niftec)
I have 2 questions about this setup:
1. For stock is there anything that might be better or to try?
2. For 19t what would you change? The car seemed to push a bit coming out of the corners compared with my stock setup.
.063 t bar give you more grip, run 20 wt oil in the shock, use stealth diff lube in the the plates, a try a copper spring instead of sliver. front end setup it fine rear too soft hence the push .