R/C Tech Forums - View Single Post - 1/5 SCALE discussion
View Single Post
Old 05-01-2006, 07:17 AM
  #5  
MissX
Tech Regular
 
MissX's Avatar
 
Join Date: Dec 2001
Location: Wanna race?
Posts: 287
Default

Ini saya nemuin 1/5 EP dari HARM
http://www.harm-racing.de/Cars_EP-1.asp?Lang=EN

Dimensions and weight
Wheel base: 535 mm
Length: 890 mm
Width: 395 mm
Weight: 7 - 8 kg

The H.A.R.M. brushless electric motors are conceived for 16 cells and facilitates above-average acceleration values of the chassis. Also the controller with reverse gear has been especially made for chassis large scale with electric drive.

The EP-1 is more than just an alternative to the existing model cars large scale with combustion motor and will convince beginners as well as rc-car experts with regard to power, driving behavior and visual effect.

Brush less motor "Car sport"
The car-sport motor has been designed for beginners and hobby drivers. With this motor top speed of 50 km/h (on-road chassis) can be achieved and a powerful acceleration is guaranteed.
Weight: approx. 255 g
Recommended controller: ELS-100 car

Brush less motor "Car-Power"
This motor also meets high requirements. With this motor top speed of up to 70 km/h (on-road chassis) is achieved and a powerful acceleration requires an experienced driver in order to use the potential of this motor.
Weight: ca. 320 g
Recommended controller: ab ELS-100 Car

Brush less motor "Car-Extreme"
Especially designed for the use on race tracks. Top speeds of up to 90 km/h (on-road chassis) require an experienced driver and enough space in order to handle this motor.
Weight: ca. 405 g
Recommended controller: ELS-200 Car


Kalau top speed bisa sampai 90 km mah kenceng banget nih.
Ada yang minat engak nih?
MissX is offline