Originally Posted by fat500
ok, i noticed several guy,s running the A,B,C,D suspension mounts from the evo III on their ta05,s. Someone said the mounts on the evo 3 , 4 , and 414-415 are all interchangeable. Is the geometry different or are they drop ins?
I would like to confirm this. Looking at them they look like they would fit. The evo 3 to ta05 i can confirm cause i looked at the car. Thanks guys.
i should have kept my 05
The mounts from the EVO 3 will fit the TA05 but are 1mm taller. YOu will still need the Bridge mounts for the inner part of the chasis since they go over the belts. If you use the EVO 3 mounts you will need to use 1mm shims under the bridge mounts. The 415 and TA05 mounts all have a 1 after the letter (A1, B1, C1 etc). Other than that they are interchangable.