Dave I'd like to have you in my pit box, that 1 to 1.5 mm over ride height in this a carpet setting.
I run on a largeish asphalt track with med/high traction on rubbers sorex or take offs.
While my initial setup on the bench at home with the AE droop gauge is 5 and 6mm this gives me about 4 to 5mm over ride height, or same as lifting the chassis from ride height up there is 4/5mm lift on the chassis to clear the tyres from the set up board, does this sound right for my track.
I'm not 100% happy with my FTTC4 setup at present this maybe some of it.