Originally Posted by Steven Key
I have a set up question for you Mini experts.
I am running a M03 and the rear end of the car chatters during hard cornering on high traction carpet.
Here is my current set-up.
Front:
Blue short springs, no spacers
Ride height 4mm
60 wt., two hole piston, 4 black O rings as travel limiters
S grips over stuffed with black shaped insert over light grey foam
Black, medium sway bar
Universals drives
TA03 ball diff
Aluminum steering knuckes
Rear:
White short springs, 2mm spacer
Ride height 6mm
40 wt., two hole piston, 4 black O rings to limit travel
Slicks, with black foam inserts
Silver, heavy sway bar
0 degree rear blocks
Any suggestions on how to get the car to go through the corners smoother. The chattering really scrubs speed.
With 4 mm. ride height and 4-0 rings in the shocks, that meens that you only have like .5 of up-travel . That will create chatter in the corners on a mini. If the other peoples suggestions dont work try taking out 1 of the 0 rings.