IIC foam tire setup
Here is what I came up with in Vegas. I thought it was very good when the traction was very high.
Front-
# 2 piston- 50 wt. oil- purple spring, mounted in the inner hole in the arm and the 2nd hole in the shock tower (from the inside)
.050 triangle shims, .025 circle shims
2 washers behind the arm, 1 in front
6* castor blocks
outer hole in steering block w/ black ballstud w/ 2 washers
longest camber link with silver ballstud with 2 washers
5 droop--
1 1/2* camber
4.5 mm ride height
diff tight
Rear--
#2 piston--40 wt. oil-- red spring
inner hole in the arm and 2nd hole on the tower (from the inside)
.050 xshims-- .050--square shims
2 washers in front of arm and 1 behind
losi 1/2 * hubs mounted backwards- inner hole on hub with silver ballstud and 2 washers-- all the way in on the camber link mount with black ballstud no washers
2* toe block
4 droop
4.5mm ride height
1 1/2* camber
Jaco dbl pink/orange front tires
Jaco dbl pink rear tires
Protoform G--6 body