R/C Tech Forums - View Single Post - Hpi Pro 4
Thread: Hpi Pro 4
View Single Post
Old 09-28-2005, 01:35 AM
  #12986  
Matt Pocknell
Tech Apprentice
 
Matt Pocknell's Avatar
 
Join Date: May 2004
Posts: 88
Default

Originally Posted by floodo1
first up you have to make sure your dropp is perfectly equal to attempt this.

it works like this: if your droop is equal and your car is balanced (tweaked properly) the tires will lift off the ground equally when you pickup the center on either end (front or back).
so if one tire is unequally weighted when you pick up on the opposite center of the car it will then lift off unequally.

so while this method does work using a tweak station is significantly better.

here are the flaws with NOT using a tweak station:
-droop has to be perfect
-you should use setup wheels not rubber tires because its inaccurate as to when rubber tires lift off
-it doesnt take into account all 4 shocks at once. (this is a very long explanation as to why this matters, if you care lmk and i'll send it to you) this is basically the reason why you may end up with shocks on one end of the car WAY out of wack (simply because you have to adjust each end independantly, you cannot use front and rear shock adjustments to fix a front or rear only problem)
-must make sure you lift in center (this applies to tweak station, however centering car on tweak station is prolly easier)

basically its like this: if you cant afford or cant access a tweak station then check ur droop and use this method. otherwise USE A TWEAK STATION!
Thanks for your help.

I will buy a mip tweak station as soon as possible.

Matt
Matt Pocknell is offline