if you say so boss
here is my setup (rubber tyres (cs22) on mid grip carpet)
front:
1 deg camber
1 deg toe in
0 deg castor block
2 tab shim under O block
0 shims under triangle block
camber link in 2nd hole from centre (on chassis brace) with 1 shim
wheelbase is standard
#2 piston
35wt oil
gold spring
5mm ride height
ball diff set to tight
shock positions : 2nd hole out from centre on tower, outer hole on wishbone
droop - 4
rear:
1 deg camber
2.5 deg toe in
no shims under either suspension block (square and X)
camber link on chassis brace : inner hole with 2 shims
camber link on hub : standard
standard wheelbase
#2 piston
30wt oil
blue spring
5.5mm ride height
shock positions : tower - 2nd from outside
wishbone - inner
droop - 3
ball diff set to medium
body - stratus3 (carpet, need a damned mazda)
tyres - cs22 premounts (dished wheels)
additive - LRP
motor - EA ROAR (27t)
gearing - 72/23
brush - reedy 767
springs - purple (+ve and -ve)
batteries in foward position