Help....
!!!
I ran my Mi2 (...with Teemu chassis) for the first time this weekend on a high bite, tight, smooth track with rubber tires (cs-27's) and I could not get it to stop pushing (off power). My set up was as follows
Front:
50wt oil
Ass blue springs
Shocks all the way out on arm, one hole in on tower
2 hole piston (tamiya shocks)
2mm shims under inner hinge pins (no anti dive or kickup...flat)
.5 deg toe out
4 deg castor
2 deg camber
upper middle hole for inside camber link
Arms spaced in the middle
Rear:
40wt oil
Ass Silver springs
Shocks all the way out on the arm, one hole in on the tower
2 hole piston (tamiya shocks)
2mm shims under inner hinge pins (no anti dive or kickup...flat)
3 deg toe in (at the arm)
1.5 deg camber
upper middle hole for inside camber link position
Outside hole on hub for outside camber link position
Arms spaced to the rear
Can anyone help PW, STLNLST, AdrianM.....anybody???