R/C Tech Forums - View Single Post - Bodyshell Handling Characteristics....
View Single Post
Old 05-17-2017, 06:28 AM
  #104  
Bar
Tech Addict
iTrader: (1)
 
Join Date: Aug 2005
Location: UK
Posts: 626
Trader Rating: 1 (100%+)
Default

Originally Posted by Skiddins
Now have run the Pre cut Montech IS200, LTC2.0 and Bitty M410.

Running the LTC2.0 last weekend I found the rear a little unstable coming out of corners, but a change to a borrowed IS200 (with std rear wing mounted waaayyy back) felt immediately better.

This weekend I ran all the bodies in subsequent quali rounds at my local track.
Track was dustier than expected so grip, and laptimes were down on the usual.
THe M410 came out on top as it had the steering of the other but was very stable at the rear (except when gusts of wind upset it).
The IS200 was next as the back just wasn't quite as planted as the M410.
The LTC2.0 just felt even more unstable.
It should be noted that the lap times etc were very similar and the track temp steadily rose throughout the day.

I want to test the same bodies again, but in a different order and also test different wings and positions.
How far did you mount the M410 forward?
Bar is offline