Originally Posted by
ThePanda
any shock larger in bore than the tamiya shocks I used won't fit, at least with the spur gear cover.
on another note i looked up the cc01 shocks, and I'm not sure they have enough uptravel.
I had that concern about big bores also, and them possibly limiting steering travel.
https://www.tamiyaclub.com/forum/ind...comment=514987
Length wise, I was going from that post.
However I didn't realise it had the long rod end on it
The shock is probably closer to 65mm.
But it appears they're the same length as the CVA shocks with maybe a fraction more travel.
I'm wanting 70+mm with the short rod end.
Going to have to find some front buggy shocks then.