Coincidental to that shock piston advice, I feel like it's 1990 again. I'm sitting here drilling out shock pistons by hand. I didn't have any 2x1.6 but fortunately I had several blanks. I'm going to be setting up the back around 2x1.6 pistons, light red springs and probably 25 weight oil. Outer location on the arm, next to outer on the tower. Shocks in front of the arms. I'm still closing in on the front. This is going to be a carpet/high grip setup where the track surface is smooth but with jumps. This wouldn't be good on rough tracks. Associated pistons are not interchangeable btw. I tried.
Last edited by fredswain; 03-14-2017 at 09:03 AM.