Originally Posted by
Still Bill
Per the Protoform guy that designed the Ford GT body, I was told to utilize the widest rear holes of the newer WGT-R/T chassis to mount the body.
In checking my WGT-R/T, SE and LE chassis...Looks that the widest position of the mounting holes for the rear posts on the new WGT-R/T kit are placed about 1/8" wider and 1/8" back from where they are on the SE chassis...And there is even more difference (huge) in the LE chassis.
Explains your issue with its mounting on an LE chassis; so, I would probably nix the Ford GT body with the older CRC Gen X-10 chassis'.
Didn't notice that until you brought it up. Good catch!
Bill
Hey all, I would like to gather some info on these mounting locations to design a more universal plate to provide a wider selection of body post positions regardless of which CRC you have.
1 are all CRC chassis using the same hole pattern for where the rear plates attach to the chassis plate?
More questions to come.