Originally Posted by Wease

In 1/10, the smaller the turn motor, the more power it makes (i.e. 6.5T > 7.5t). Most people run a 6.5t or 7.5t motor when running in Mod 4wd. If you are new to 1/10, I'd probably recommend the 7.5t motor which will be easier to drive while you are learning.

You will want to get a 2S Shorty lipo. Anywhere from 50c to 100c and 5000 mAh (give or take a few hundre mAh) is about right. Currently I'm running a 65C 5000 mAh ProMatch shorty. The 22-4 2.0 is made for a Shorty Lipo config.

I run the kit set-up on the 22-4 2.0 and its excellent. The only mod I did was to swap the rear arms (Left to Right and vice/versa) and mount the shocks in front of the tower. You will have to drill a hole on front of each arm once they are swapped to accomodate the sway bar mount.