I copied this from an excel spreadsheet so the format is bit off, but it shows the FDR using 15 - 21 Tooth pinions for the EB48.1-3 and for the new gearing used in the EB48.4.
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
Last edited by suzukipro; 01-04-2017 at 07:10 PM.