Originally Posted by
to slow for you
ok
front droop 6mm
rear droop 5mm
front springs 2.5-2.8
rear springs2.6
shock oil 425 cst frt and rear
front sway bar 1.4
rear bar 1.3
shock locations frt 2hole out
rear shocks location 3 out
left and right balance ok
arm sweep front
rear toe 3.5 in
front toe total 1.5 out
frt spool
rear gear diff 6000cst
camber frt and rear 2.0 -
generally i run 5.5 RH front and rear with about 1.5 droop over ride height. your rear diff lube sounds too thick, with some recent reading i went from 7k to 2k. i'm testing it out this weekend, but i could tell it was pushing me on exit.
also as was said above, go to 3* toe in on the rear and i wouldnt go beyond 1* toe out on the front.
ALSO front spools does have a tendency to push as well coming hot into a corner especially off a straight away